DUBI CHEM MARINE INTERNATIONAL - | E-Showroom
DUBI CHEM MARINE INTERNATIONAL - | E-Showroom
Item Code: RXSOL-22-2201-210
RXSOL Hold Wash is a versatile all purpose quality marine cleaning solution. It can be used as a powerful stand-alone cleaner for oily stains and residues, or in combination with RXSOL Hold Wash as a barrier remover hold wash is a versatile all purpose marine cleaning solution it can be used as a powerful stand alone cleaner for Petroleum oily stains and residues, vegetable and animal fats, as well as dirt, proteins, soils, coal, ore, coke or in combination with RXSOL hold wash as a barrier remover.COAL REMOVER ::: • Use cold - no heating required.
• Economical to use. • Scraping not required. • Non- flammable.Dose:
Directions for Use and Dose Rates
Let this product soak into the surface for 30-45 minutes. Then using a high-powered spray washer blast the surfaces until the stains and discoloration is gone.
• Cleaning time will vary depending on the extract nature and thickness of deposit to be removal. • Stubborn deposits should be scrubbed to assist the cleaning operation. Your local Rx CLEANSERS representative will work with you to design the optimum concentration & procedure for your system. RXSOL-22-2201 should be mixed with fresh water to form a solution of 10-30%, depending on the extent of scaling. After using RXSOL-22-2201 it is essential to thoroughly rinse all metal surfaces at least once with a 0.5% solution of Alkalinity Control in fresh water. This solution should be circulated for 2-4 hours or until an acceptable pH value is obtained. This will neutralize any remaining acidity & passivate steel surfaces.