TITANIUM TUBES

Titanium bar, titanium rod CDM Group(Titanium) is an approved ISO9001:2008 Manufacturer by UKAS,located in China.We manufacture Titanium bar and titanium rod: Grade : GR2 , GR5, Gr9 , GR7 etc Forged Bar: diameter (26-200)��less then or equal to 4000 Rolled Bars: diameter (8-25)��less then or equal to 1500 Standard: ASTMB348, AMS4972,ASTM F67,ASTM F136, h9 tolerance is available. Titanium Casting CDM Group specializing in the production of titanium and titanium alloys Casting products: Titanium investment casting of vacuum furnace, Material :GR2 GR5 (Ti6Al4V), Minimal thickness of casting can be :0.8mm Max size can be : 1200 mm��600mm Roughness of casting : Ra3.2-6.3um Standard : ASTM B367 , BMS 7-310, BMS 7-336, AMS4911C-2002,MIL-T-81915A Titanium clad steel tube sheet, Titanium tube sheet, Titanium caldding plate CDM Group(Titanium) is an approved ISO9001:2008 Manufacturer by UKAS, located in China.We manufacture Titanium metal clad material / Explosive clad metal material /titanium tube sheet for process equipment. Such as Ti Gr2 as clad material, Steel A516 GR70 as base material. Standard as per ASTM B898. Titanium fasteners, Titanium machining parts, Titanium screw , Titanium bolt CDM Group(Titanium) is an approved ISO9001:2008 Manufacturer by UKAS,located in China.We supply large volume fastener to chemical industry, distributor, racing moto industry. Grade:GR2,Ti-6AL-4V, GR7 Titanium Bolt, Screw, nut and washer can be American , Metric(M0.8-M24 or bigger), and Imperial standard, also can as per drawing. Titanium Foil CDM Group(Titanium) is an approved ISO9001:2008 Manufacturer by UKAS,located in China. We manufacture titanium Foil from 0.02mm to 0.1mm Grade: GR1 GR2 Gr5 Standard : ASTM B265 Titanium Forging, Titanium ring , Titanium disc CDM Group(Titanium) is an approved ISO9001:2008 Manufacturer by UKAS, located in China. CDM supply titanium forging such as Titanium ring, titanium disc, titanium shaft etc As Per ASTM B381 Material: GR1, GR2, GR5 Titanium pipe fittings,Titanium elbow, Titanium reducer , Titanium tee, CDM Group(Titanium) is an approved ISO9001:2008 Manufacturer by UKAS,located in China. We manufacture Titanium pipe fittings , including socket welding fittings, butt welding fittings and threaded fittings : Titanium elbow (45��, 90��, 180��) Titanium Reducer (Concentric, Eccentric). Titanium Tee(Straight, Reducing). Also stub ends, caps, flanges etc. Standard: ASME B16.5 , ASME B16.9, ASME 16.11 Titanium seamless tube , Titanium tube ,Titanium pipe ,Titanium tubing,Titanium alloy tube CDM Group(Titanium) produce titanium seamless tube to world-wide clients, who specializing in process equipment such as heat exchanger, also for power generation, thermal, and oil and gas exploration etc. Grade: GR1 GR2 GR3 GR7 GR9 GR12 GR16 GR17; Size (mm): OD0.8 ~ 168; Wall Thickness: 0.1 ~ 7 ;Maximum length: 18000MM; Standard: ASTMB338, ASME SB338, ASTM B861, DIN17861 etc. Titanium sheet,Titanium Plate ,Titanium coil ,Titanium strip CDM Group(Titanium) is an approved ISO9001:2008 Manufacturer by UKAS,located in China. We manufacture titanium sheet and titanium plate Grade:GR1, GR2, GR4, GR5, Ti-8-1-1 etc Size(mm): (0.3 to 50mm)thickness �� Maximum 2500 width�� Maximum 10000 length Standard width and Length(mm): 1000 width�� 2000 Length Standard:ASTM B265 , AMS 4911, AMS 4916, ASME, MIL, Titanium cold coil / titanium strip :GR1 GR2 GR3 , Size(mm):0.2mm-3mmT��75-1400Width��Coil with ASTM B265. Titanium Stamping CDM Group(Titanium) is an approved ISO9001:2008 Manufacturer by UKAS,located in China. We manufacture Titanium Stamping: Grade: GR2 GR5 (Ti6Al4V), Size: Nach Zeichnung oder Muster. Titanium welded tube,Titanium welding tube CDM titanium welded tubes are processed from titanium coil, and longitudinally welded by TIG process without metal filler, so it guarantees the homogeneity of the welded area. Grade: GR1, GR2, GR9,GR16 Size(mm): OD(8-63)��WT(0.5-3)��L, at random Length, coil tube, U-Tube. Standard: ASTMB338 , ASME SB338. Titanium Wire,Titanium Welding Wire CDM Group(Titanium) is an approved ISO9001:2008 Manufacturer by UKAS,located in China. We manufacture Titanium Wire and Welded Wire: Titanium wire: GR1, GR2, Ti-6AL-4V Diameter (0.03-6.0MM)�� Straight length/Spool/Coil with ASTM B863 Titanium welded wire: ERTi1, ERTi2, ERTi3, ERTi4, ERTi5, ERTi7, ERTi9, ERTi12, ERTi23, Diameter: 0. 05mm~10mm (0.002inch-0.4inch) ��Straight length/Spool/Coil with AWS A5.16 standard.