DOCK SHELTER SUPPLIERS IN UAE

PROMStahl is a globally renowned expert in the field of docking technology.

Continuous optimization of proved technologies and the development of new products lead to innovative, sophisticated and cost-efficient systems for your individual docking situation.

Dock shelters are used to provide the best possible sealing between the building and the docking vehicle

DOCK SHELTER TYPES:

Mechanical dock shelter PMV

Different sizes of loading/unloading openings of warehouses and the docked vehicles result in gaps that need to be effectively sealed.

Dock shelters protect your goods against the adverse effects of wind and rain.

An integrated rain channel allows lateral drainage of the rain water.

Energy efficiency is one of the positive side effects that can be reached thanks to this type of dock shelter.

It is delivered pre-mounted in three parts and can easily be installed at the facade.

This particular design guarantees considerable cost and time efficiency.

Inflatable dock shelter PWI

The PWI inflatable dock shelter combines optimal sealing characteristics with a wide range of applications.

Inflatable side and top cushions seal the loading opening providing almost airtight connection.

That’s why these dock shelters are ideal for cold stores and air-conditioned warehouses. Summer heat, winter cold, draught, 

dust and insects are kept out of the warehousing facility.

This type of dock shelter is delivered in three pre-mounted parts and can thus easily be installed at the facade.

This particular design guarantees considerable cost and time efficiency.

Mechanical dock shelter with side cushions (PMSK)

 The mechanical dock shelter PMSK is a new product of PROMStahl™ wide product range.

It mainly consists of a height-adaptable roof part and two side parts.

These side parts are made of a special foam material.

If a vehicle does not dock in perfectly, these foam side parts are compressed and then move to the sides.

Therefore, the dock shelter is not damaged even if the truck does not reverse centrically.

Thanks to the special design of the height-adaptable roof part, damage is avoided even for very high 

trucks like jumbo vehicles or demountable containers.

If the vehicle is lifted, the roof automatically follows this upward movement.

The roof returns to its original position after the vehicle has left the docking station.

 Alcove-mounted dock shelter PMN 

The PMN alcove-mounted dock shelter is installed directly in the recess of the building

so as not to disturb the continuity of the facade and improve the overall appearance.

This type of dock shelter is made of aluminum sections mounted to both sides and to the top edge of the recess.

The shelter can be set in concrete, steel or installed using a special fixing system.

The high-durability, 3 mm thick curtains are made of 2-layer, PVC-coated fabrics.

Warning stripes on the front section of the dock shelter facilitate the vehicle dock-in procedure.

This type of dock shelters is delivered in three pre-mounted parts and can easily be installed at the facade.

This particular design guarantees considerable cost and time efficiency.