GI Lintel In Djbouti

Ghosh Group, Ajman, Dubai, United Arab Emirates – started Galvanized Lintel manufacturing from August 2012.

Ghosh Metal Industries LLC, has a very strong and energetic technical team to process quality production of the GI Lintel.

Propping Galvanized and Stainless Steel lintel is sometimes installed to facilitate speed of construction. It should only be introduced after initial masonry load has been applied to the lintel. When propping a lintel, a horizontal timber plank should be placed along the underside of the lintel and suitable props secured into place at maximum 1220 mm centres.

The Galvanized Steel we use to manufacturing of our GI lintel is ASTM A653, Grade 50, Structural Quality with 275 GSM Zinc Coating. The external GI Lintel Flange 50 mm to 150 mm.

Galvanized and Stainless Steel Lintels should be installed with a minimum end bearing of 151mm, bedded on mortar and levelled along its length and across its width. Point loads should not be applied directly onto lintel flanges. Lintels should have a minimum of masonry 151mm high between the flange and the application level of any form of loading.

Ghosh Metal Industries – manufacture GI Lintel, Stainless Steel Lintel, Powder Coated GI Lintel with the

Thickness range – 1.5 mm to 4.0 mmInner width – 153 mm to 203 mmLength – 900 mm to 2200 mm OrCustomized according to our customer’s requirement

Today Ghosh Group is well known in Dubai | UAE | Oman | Saudi and Qatar for its GI lintel supply to Bahrain, Kuwait, Iraq, Sriya, Jordan etc.,

For enquiry and sales, please email us on [email] or call +971 553 258 409